MAGEWELL
Pro Convert NDI to HDMI 4K
Part Number: 64110
Converts a live NDI® stream into 4K HDMI signal
- Connects baseband presentation or distribution equipment into IP-based media networks
- Decodes Full NDI or NDI|HX into 4K HDMI at a super-low latency
- Automatically optimizes output based on EDID characteristics of connected display
MSRP: $999.00 USD
Warranty Term: 2 Years
PRODUCT DETAILS
Output Features
- Max output: 4096×2160 60fps 4:4:4 8-bit
- Delivering video at the preferred video format according to the EDID of the connected monitor.
- Support 48KHz 8-channel audio output
- HDMI interface: HDMI 1.4/2.0
NDI Decoding Features
- Decoding up to 4Kp60 streams of Full NDI, NDI®|HX, NDI®|HX2, NDI®|HX3, RTSP, HTTP, HLS, RTMP Pull/Push and MPEG-TS over UDP/SRT/RTP protocols
- H.264/H.265 video decoders
- AAC/MP3 audio decoders
- Support NDI 5.x
Configuration Features
- Register with Control Hub
- Remote control via WebUI and Control Hub
- Provide comprehensive information regarding the device and input signals in real-time
- Allow to configure how an input is processed and encoded, including deinterlacing, EDID, up/down scaling, frame rate, aspect ratio, as well as the network connection
- Support USB RNDIS/ECM
- Provide HTTP APIs
Built In Control Features
- MENU: press to display the menu or select current parameter, or toggle the switch left and right to cycle through the options
- 16 Position Rotary DIP Switch: set board-index from 0 to F