MAGEWELL
Pro Convert HDMI 4K Plus
Part Number: 64010
Converts a 4K HDMI input signal into Full NDI® with loop-through
- Supports up to 4096×2160 60fps (4:4:4) input signals including 1080p 144fps
- Connects existing source equipment into NDI-enabled, IP-based media networks
- Plug-and-play ease of use with automatic input format detection and DHCP network configuration
MSRP: $999.00 USD
Warranty Term: 2 Years
PRODUCT DETAILS
Input & Loop Features
- Max input & loop through signal: 4096×2160 60fps 4:4:4 8-bit
- Input video at any format by custom EDID of input port
- Video formats: RGB, YUV BT.601/709/2020
- 8-channel HDMI-embedded audio
- HDMI interfaces: HDMI 1.4/2.0, DVI-D
NDI Encoding Features
- Encoding Full NDI real-time stream at up to
- 4096×2160 60fps 4:2:2 8-bit
- 1920×1080 240fps 4:2:2 8-bit
- Output the same resolution as input or any custom resolution.
- Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate
- Encoding 8-channel NDI-embedded audio
- Support NDI 5.x
Configuration Features
- Register with Control Hub
- Remote control via WebUI and Control Hub
- Provide comprehensive information regarding the device and input signals in real-time
- Allow to configure how an input is processed and encoded, including deinterlacing, EDID, up/down scaling, frame rate, aspect ratio, as well as the network connection
- Support USB RNDIS/ECM
- Provide HTTP APIs
PTZ Control Features
- Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI
- Mini-DIN–8 jack (shared with Tally light)